Level Switches

VEPS ENGINEERING PVT. LTD. Tel: +91 657 231 5253

Engineering Solutions Redefined Email: enquiry@veps.in

 

SWITZER INSTRUMENTS > LEVEL SWITCHES AND INDICATORS

 

Switzer level switches, indicators and transmitters offer ecomonical solution to level detection in many process applications. A variety of configuration and mounting styles are available to meet wide process requirements. Sensors are available for both conductive and non-conductive processes

 

ENQUIRY : enquiry@veps.in | TEL: 0657 231 52 53

 

MODEL NAME

IMAGE

SPECIFICATIONS

BROCHURE

MANUAL

Optical Level Switch

 

•Model SD 20

•Single Point level monitoring in small equipment & vessels (Gear box)

•Miniature and low-cost

•Conductive and non-conductive Liquids

•Uses Infra-red technology

•IP:68 protection

•Power Supply 10 t o 28V DC

 

 

NA

 

ini Tuning Fork Level Switch

 

 

 

 

 

•Model SC 24 (240 or 241 Series)

•Low Cost , High Value

•Stainless steel SS304 housing with SS316 fork

•LED working status indication

•Power Supply : 20~250 ac/Vdc or12~55Vdc

•Fork Length 100mm

•Operating temperature upto 120ºC

•1 inch connection

 

RF Capacitance

 

•Models K 5711 / 5712

•Probe : Rigid or Flexible, single or dual - Stillwell & heathing optional

•Length : Rigid 0.1 to 3 Mtrs ;

•Flexible 3 to 25 Mtrs

•Electronics : Integral or Remote

•Power Supply : 90 to 250V AC or 18 to 32 V DC

•Set points : One for 5711 & Two for 5712

•Contact Output : 1 DPDT relay contact per setpoint

•Type : Failsafe or Normal Alarm

•Weatherproof / flameproof enclosures

•Mounting : 5711 — Vertical / Horizontal & 5712 — Vertical only

 

 

•Models 5720

•Single Point level monitoring in small equipment &vessels (Gear box)

•PTC Thermistor with 2 Mtrs. long cable

•Conductive and -conductive Liquids

•Media Temperature 90°C Max

•Mounting Side / Top

•½" BSPM screwed connection; other sizes available

•DIN Rail mount remote electronics

•Power Supply 90 to 250V AC or 24V DC

•5A 250V AC / 28V DC

•1 SPDTrelay contact (with Manual Reset)

•'Power ON’, ‘Relay ON’ & ‘Sensor break’ indicators

 

 

•Models 5701 / SE250

•Foldable Paddle - Eliminates dismantling for installation

•High or Low level monitoring in bunkers, silos, hoppers

•SS Vane and Wetted Parts

•Immersion Length Up to 750 mm(35mm for SE250

•Mounting Vertical (side mounting @ 15° to vertical)

•Switching 1 SPDT micro switch

•Power Supply 230V AC, 50 Hz

•Power Supply for SE 250 110V AC, 220 AC, 240V AC 50 / 60 Hz ; 24V DC

•Aluminium weatherproof and Flameproof enclosure

 

•Models MW

•Miniature FLoat

•Precise Movement

•Totally Isolated

•Snap Acting Microswitch

•Weatherproof ABS enclosure

•Models 5730

•Probe : Rigid or Flexible, single or dual. Stillwell & sheathing optional

•Length : Rigid 0.1 to 3 Mtrs ; Flexible 3 to 25 Mtrs.

•Electronics : Remote

•Mounting : Vertical

•Power Supply 90 to 250 V AC, 20 to 30 V DC

•Output 4 to 20 mA 2-wire; 1 to 5 V DC 3-wire

•Accuracy 1%

•3 digit dot matrix display

•20 segment bar graph

•RS-232C Serial port

•4 Set point On/Off control

•5 Relay Sequences

•Adjustable dead band and time delay

•Tactile keys for calibration, units selection & setting

•No probe display

•Full calibration with 5% level change

•Weatherproof / flameproof enclosure for probe head & weatherproof for remote electronics

•Remote calibration and data dump through PC

•Models 5750

•Probe : Rigid or Flexible, single or dual. Stillwell & sheathing optional

•Length : Rigid 0.1 to 3 Mtrs ; Flexible 3 to 25 Mtrs.

•Electronics : Integral or Remote

•Mounting : Vertical

•Power Supply 24V DC

•Output 4 to 20 mA 2-wire; Voltage output 3-wire config.

•Accuracy 2% FSR (1 mm WC for spans up to 50 mm)

•Weatherproof / flameproof enclosures

Copyright © 2014 VEPS ENGINEERING (P) LIMITED All Rights Reserved